AirShields TI 100 Infant Incubator

AirShields TI 100 Infant Incubator

Condition REFURBISEHD

FEATURES

• Intended for transport of high risk, premature, low birth-weight, or critically ill newborns.
• It provides a means to control air temperature, oxygen concentrations, and relative humidity.
• A double wall hood permits full visibility and provides an effective thermal barrier from the environment.

SPECIFICATIONS

Dimensions (with stand):

• Length: 40.25 in. (102 cm)
• Width: 22.25 in. (56.5 cm)
• Height: 46.75 in. (118.7 cm) maximum, 34.75 in. (88.3 cm) minimum

Power Requirements:

• AC: 110.120 VAC 50/60/400 Hz, sine or square wave 170/200 Watts and 225/270 Watts with batteries charging.
• DC: 12 VDC, 115 Watts

Internal Battery:

• Type: gel type, sealed and rechargeable.
• Voltage: 12 VDC nominal
• Quantity: 2
• Charging Time: two batteries take 20 minutes to recharge from fully discharged.
• Life expectancy: minimum 200 full charge/discharge cycles.

Chassis Leakage Current: 100µA or less

Alarms:

• High Temp: Actuates at displayed incubator temperature of 39º ± 0.5 ºC.
• Sensor: Actuates if High Temp alarm sensor is electrically open or shorted.
• Power Failure: Actuates if main AC power fails and no DC back-up power is present.
• Heater Temp: Actuates if heater temperature exceeds 77 ºC nominal.
• Low DC: Actuates if incubator DC voltage has fallen below 10.5 VDC nominal.

Temperature:

• Set Point Range: 21.5 ºC ± 1.0 ºC to 38 ºC
• Rise Time: 30 minutes
• Variability: 0.2 ºC
• Overshoot: 1.5 ºC maximum
• Uniformity: 1 ºC
• Correlation of Displayed Incubator to Actual Incubator Temperature at Temperature Equilibrium: 1 ºC
• Correlation of Displayed Incubator Temperature to Set Point at Temperature Equilibrium: ± 0.5 ºC
• Observation Light Output: 10-foot candles at mattress level